How do you add a network projector to our "Residential Gateway" office network?

[trixia68]

Its a Sanyo model # PLC-WXU700A. It comes with some dedicated software to set up it's own network which worked just fine. But the trouble is it kicks me off this network, that has internet, when it does that.

I'd just like to add the projector to this office network, if possible. How can that be done? The directions are about as clear as mud, to me, a network noob. -_-

This the pdf file for network setup:

http://us.sanyo.com/dynamic/product/Downloads/PLC-WXU700A_NETWORK%20SET%20UP%20WINDOWS-49638736.pdf

They don't explain how to get the info off our gateway tho, so I'm at a loss...

[JustinF]

Hi,

Please tell me if you are trying to connect a wired, or a wireless connection and I will research the issue further.

Thank you,

JustinF

[trixia68]

Hi Justin.

It's a wireless network that is provided for by the U-Verse Residential Gateway mfd by 2Wire. I think the address is 192.168.1.254

[JustinF]

Hi,

So in section 5, page 35 it shows how to setup the wireless. Explaining how to start it up on your projector and also how to connect to your network. Have you input the correct data for the wireless network? The DHCP should be on and you should use the normal information from your 2wire for the security type and password. In your post you said it automatically drops you from the network. Are you sure you are using the correct settings(SSID and security key)? Please let me know if you need assistance finding this information. Please verify that you are using the correct information and provide me more information on whether you are connecting to your office network of if you set something else up.

Thank you,

JustinF

[trixia68]

Thanks, I will try again this afternoon and then let you know how it goes.

[trixia68]

Justin,

Just wanted to update our situation. The Sanyo tech came out and arranged the equipment much to our satisfaction! Thanks for your help in the matter.