- AT&T Forums Home
- /
- U-verse Forums
- /
- U-verse Internet
- /
- Features and How To
- /
- Re: 2WireRealtime.exe
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic to the Top
- Bookmark
- Subscribe
- Printer Friendly Page
2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-21-2010 06:51:59 PM
I released 2WireMRTG.exe yesterday, to allow MRTG to get statistics off the 2Wire 3800HGV router. That release was in this thread.
I realize that many people cannot set up MRTG because they don't have a server to run it on, or would not want to go through the hassle of that much configuration. I therefore am releasing this tool, 2WireRealtime.exe, which is a stand-alone application to view data rates and information from the U-Verse RG. This program will not graph trends over time nor store data, but it will give instantaneous snapshots of activity on the RG.
This program is very easy to use, just download and double-click. The program does the rest. There is no installer, no registry entries are made.
There is an extensive ReadMe file that explains all the particulars of the statistics that are displayed.
Note: This program REQUIRES RG firmware v6.1.9.24 (the newer version rolling out now). It will not work if your RG is currently running the older firmware (v5.29.105.94).
The program is downloadable from here.


Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 09:14:59 AM
Looks nice but useless for anyone whom has a router behind the GW in bridged mode.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 09:48:37 AM
The program will retrieve stats off the RG even if there is an intervening router if you put the IP address of the RG into the program in the box at the top. This is clearly explained in the ReadMe file.
I'd also like to thank you personally after I spent 8 hours of my own time yesterday writing this to release to the community for free, that the first words out of your mouth were that it's "useless". That is of course, before you read the documentation that has already addressed your concern.
Bravo. People like you are the reason I donate my time. ![]()

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 01:15:32 PM
Ok I got it to pull up the rg and here is what happened.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
at System.Double.Parse(String s, NumberStyles style, NumberFormatInfo info)
at DataRetriever._3800HGV.get_PowerDown()
at _2WireRealtime.Main.UpdateStats()
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.
----------------------------------------
2WireRealtime
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.Vis
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Window
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawin
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtim
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Config
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.
----------------------------------------
DataRetriever
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
My system specs.
Win 7x64 Home premium.
core 2 duo
8 GB ram

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 02:13:26 PM
OK, cool. I bet you are a FTTP customer. I was wondering about this, but since I am FTTN I could not test it.
I am at work right now, but when I get home I'll post what I need you to do. I need you to pull up a certain web page off your RG and post the HTTP source code to that page here. I'll get you the details.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 02:21:36 PM
I'm getting the same error message.
Bob
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 02:33:17 PM
Nope FTTN. twisted wire 700 ft from vdsl to premisses.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 04:11:33 PM
OK, please do the following to get some of the HTML source code from your RG, this will help me troubleshoot:
There are 4 different URLs of information that I need:
1. http://192.168.1.254/xslt?PAGE=C_1_0
2. http://192.168.1.254/xslt?PAGE=C_2_0
3. http://192.168.1.254/xslt?PAGE=C_5_3
4. http://192.168.1.254/xslt?PAGE=C_0_0
Copy each of these URLs into your web browser one at a time and hit enter. (If your RG is not at 192.168.1.254, replace that IP address with the IP address of your RG. bsm2003, in your case, that will probably be 172.16.0.1).
For each URL, do the following:
1. Right-click somewhere within the web page and select View Source (Internet Explorer) or View Page Source (Firefox).
2. In the window that pops up, click in it and hit Ctrl-A to select all text, and Ctrl-C to copy the text to the clipboard.
3. Create a new reply here on the UTalk forum in this thread. Click the code button (looks like this:
) in the toolbar. In the window that pops up, hit Ctrl-V to paste the HTML source code.
4. Click the Insert button to insert the code into your reply post. Then click the Post button to post your reply.
Once I have this info, I can see what's going on. Thanks in advance.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 04:18:25 PM
# 1
<?xml version="1.0"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <link rel="stylesheet" type="text/css" title="Main" href="/css/basic.css" /> <link rel="stylesheet" type="text/css" title="Main" href="/css/tabs.css" /> <script type="text/javascript" src="/javascript/prototype.lite.js"></script> <script type="text/javascript" src="/javascript/behaviour.js"></script> <script type="text/javascript" src="/javascript/style.js"></script> </head> <body> <div id="container"> <div id="logo"></div> <div id="header"> <ul id="primary"> <li> <a href="/xslt?PAGE=A_0_0">Home</a> </li> <li> <a href="/xslt?PAGE=B_0_0">Services</a> </li> <li> <span>Settings</span> </li> <li> <a href="/xslt?PAGE=D_0_0">Site Map</a> </li> </ul> </div> <div id="main"> <div id="outercontainer"> <div id="header2"> <ul id="secondary"> <li> <a href="/xslt?PAGE=C_0_0">System Info</a> </li> <li> <span>Broadband</span> </li> <li> <a href="/xslt?PAGE=C_2_0">LAN</a> </li> <li> <a href="/xslt?PAGE=C_3_0">Firewall</a> </li> <li> <a href="/xslt?PAGE=C_4_0">Logs</a> </li> <li> <a href="/xslt?PAGE=C_5_0">Diagnostics</a> </li> </ul> </div> <div id="innercontainer"> <div id="contents"> <div id="header3"> <ul id="tertiary"> <li> <span> <a href="/xslt?PAGE=C_1_0">Status</a> </span> </li> <li> <a href="/xslt?PAGE=C_1_1">Link Configuration</a> </li> <li> <a href="/xslt?PAGE=C_1_4">Multicast</a> </li> </ul> </div> <h2>Summary Status</h2> <table class="colortable"> <tr> <td class="tablesidebold">Internet</td> <td> <img class="bullet" alt="" width="5" height="5" src="/images/bullet_large_green.gif" /> </td> <td>Connected</td> </tr> <tr> <td class="tablesidebold">DSL Link</td> <td> <img class="bullet" alt="" width="5" height="5" src="/images/bullet_large_green.gif" /> </td> <td>Connected</td> </tr> </table> <h2>Internet Details</h2> <table class="colortable"> <tr> <td class="tablesidebold">Broadband Link Type</td> <td>Built in modem - VDSL</td> </tr> <tr> <td class="tablesidebold">Connection Type</td> <td>Direct IP (DHCP or Static)</td> </tr> <tr> <td class="tablesidebold">Current Internet Connection</td> <td></td> </tr> <tr> <td class="indent">IP Address</td> <td>99.174.246.53</td> </tr> <tr> <td class="indent">Subnet Mask</td> <td>255.255.252.0</td> </tr> <tr> <td class="indent">Default Gateway</td> <td>99.174.244.1</td> </tr> <tr> <td class="indent">Primary DNS</td> <td>68.94.156.1</td> </tr> <tr> <td class="indent">Secondary DNS</td> <td>68.94.157.1</td> </tr> <tr> <td class="indent">Host Name</td> <td></td> </tr> <tr> <td class="indent">Domain</td> <td></td> </tr> <tr> <td class="indent">MAC Address</td> <td>00:25:3c:3e:b6:68</td> </tr> <tr> <td class="indent">MTU</td> <td>1500</td> </tr> </table> <h2>DSL Details</h2> <table class="colortable"> <tr> <td class="tablesidebold">Modem Type</td> <td colspan="3">Built in modem - VDSL</td> </tr> <tr class="skipcolor"> <td> <br /> </td> </tr> <tr> <td class="tablesidebold">DSL Line Coax</td> </tr> <tr> <td></td> <th>Down</th> <th>Up</th> </tr> <tr> <td class="indent">User Rate</td> <td>25208 kbs</td> <td>2040 kbs</td> </tr> <tr> <td class="indent">Max User Rate</td> <td>64000 kbs</td> <td>Not Available</td> </tr> <tr> <td class="indent">Noise Margin</td> <td>29.5 dB</td> <td>Not Available</td> </tr> <tr> <td class="indent">Attenuation</td> <td>12.9 dB</td> <td>Not Available</td> </tr> <tr> <td class="indent">Output Power</td> <td>14.2 dBm </td> <td>-17.5 dBm</td> </tr> <tr class="skipcolor"> <td> <br /> </td> </tr> <tr> <td class="indent">Protocol</td> <td>G.993.2</td> </tr> <tr> <td class="indent">Channel</td> <td>Interleaved</td> </tr> <tr> <td class="indent">DSLAM Vendor Information</td> <td colspan="2">Country {65461} Vendor {CXSY} Specific {12590 } </td> </tr> <tr> <td class="indent">Attenuation @ 300kHz</td> <td>7.1 dB</td> </tr> <tr> <td class="indent">Final Receive Gain</td> <td>3.0 dB</td> <td>Ok</td> </tr> </table> <h2>Traffic Statistics</h2> <table class="colortable"> <tr> <td class="tablesidebold">IP Traffic</td> <th>Bytes</th> <th>Packets</th> <th>Errors</th> <th>%</th> </tr> <tr> <td class="indent">Transmit</td> <td>6298080040</td> <td>13874635</td> <td>0</td> <td>0</td> </tr> <tr> <td class="indent">Receive</td> <td>21022058944</td> <td>25129891</td> <td>0</td> <td>0</td> </tr> <tr class="skipcolor"> <td> <br /> </td> </tr> </table> <h2>DSL Link Errors</h2> <p>Collected for 6Days13:11:25</p> <table class="colortable"> <tr> <td></td> <td>Since</td> <td>Current</td> <td>Current</td> <td>Time Since</td> </tr> <tr> <td></td> <th>Reset</th> <th>24-hr int.</th> <th>15-min int.</th> <th>Last Event</th> </tr> <tr> <td class="tablesidebold">DSL</td> </tr> <tr> <td class="indent">Link Retrains</td> <td>1</td> <td>0</td> <td>0</td> <td>6Days13:08:09</td> </tr> <tr> <td class="indent">DSL Training Errors</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Training Timeouts</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Loss of Framing Failures</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Loss of Signal Failures</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Loss of Power Failures</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Loss of Margin Failures</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">**bleep**. Seconds w/Errors</td> <td>1</td> <td>0</td> <td>0</td> <td>1Day15:29:53</td> </tr> <tr> <td class="indent">**bleep**. Sec. w/Severe Errors</td> <td>0</td> <td>0</td> <td>0</td> <td>0:00:00</td> </tr> <tr> <td class="indent">Corrected Blocks</td> <td>312509</td> <td>1517</td> <td>0</td> <td>1:00:21</td> </tr> <tr> <td class="indent">Uncorrectable Blocks</td> <td>1</td> <td>0</td> <td>0</td> <td>1Day15:29:53</td> </tr> <tr> <td class="indent">DSL Unavailable Seconds</td> <td>142</td> <td>0</td> <td>0</td> <td>6Days13:07:11</td> </tr> </table> <form name="pagepost2" method="post" action="/xslt?PAGE=C_1_0_POST_RESET_STATS" id="pagepost2"> <input type="hidden" name="NONCE" value="4fe5dff22290ce3" /> <input type="hidden" name="THISPAGE" value="C_1_0" /> <input type="submit" class="button" value="Reset Statistics" /> </form> </div> </div> </div> </div> </div> </body> </html>
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 04:19:36 PM
#2
<?xml version="1.0"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <link rel="stylesheet" type="text/css" title="Main" href="/css/basic.css" /> <link rel="stylesheet" type="text/css" title="Main" href="/css/tabs.css" /> </head> <body> <div id="container"> <div id="logo"></div> <div id="header"> <ul id="primary"> <li> <a href="/xslt?PAGE=A_0_0">Home</a> </li> <li> <a href="/xslt?PAGE=B_0_0">Services</a> </li> <li> <span>Settings</span> </li> <li> <a href="/xslt?PAGE=D_0_0">Site Map</a> </li> </ul> </div> <div id="main"> <div id="outercontainer"> <div id="header2"> <ul id="secondary"> <li> <a href="/xslt?PAGE=C_0_0">System Info</a> </li> <li> <a href="/xslt?PAGE=C_1_0">Broadband</a> </li> <li> <span>LAN</span> </li> <li> <a href="/xslt?PAGE=C_3_0">Firewall</a> </li> <li> <a href="/xslt?PAGE=C_4_0">Logs</a> </li> <li> <a href="/xslt?PAGE=C_5_0">Diagnostics</a> </li> </ul> </div> <div id="innercontainer"> <div id="contents"> <div id="header3"> <ul id="tertiary"> <li> <span> <a href="/xslt?PAGE=C_2_0">Status</a> </span> </li> <li> <a href="/xslt?PAGE=C_2_1">Wireless</a> </li> <li> <a href="/xslt?PAGE=C_2_2">Wired Interfaces</a> </li> <li> <a href="/xslt?PAGE=C_2_3">DHCP</a> </li> <li> <a href="/xslt?PAGE=C_2_4">IP Address Allocation</a> </li> <li> <a href="/xslt?PAGE=C_2_5">Statistics</a> </li> </ul> </div> <h2>Private Network</h2> <table> <tr> <td class="tablesidebold">Router/Gateway Address</td> <td>172.16.0.1</td> </tr> <tr> <td class="tablesidebold">Subnet Mask</td> <td>255.255.0.0</td> </tr> <tr> <td class="tablesidebold">Private Network DHCP Info</td> <td></td> </tr> <tr> <td class="indent">Range</td> <td>172.16.1.33 – 172.16.1.250</td> </tr> <tr> <td class="indent">Allocated</td> <td>2</td> </tr> <tr> <td class="indent">Remaining</td> <td>216</td> </tr> <tr> <td class="indent">Timeout</td> <td>2880 minutes</td> </tr> </table> <h2>Interfaces</h2> <table class="centerdata"> <tr> <th>Interface</th> <th>Status</th> <th>Active Devices</th> <th>Inactive Devices</th> </tr> <tr> <td class="rowlabel"><img alt="" class="centerimg" src="/icons/icon_small_ethernet.gif" />Ethernet</td> <td>Enabled</td> <td>1</td> <td>0</td> </tr> <tr> <td class="rowlabel"><img alt="" class="centerimg" src="/icons/icon_small_usb.gif" />USB</td> <td>Disabled</td> <td>0</td> <td>0</td> </tr> <tr> <td class="rowlabel"><img alt="" class="centerimg" src="/icons/icon_small_wireless.gif" />Wireless</td> <td>Disabled</td> <td>0</td> <td>0</td> </tr> <tr> <td class="rowlabel"><img alt="" class="centerimg" src="/icons/icon_small_hpna3.gif" />HomePNA1</td> <td>Enabled</td> <td>0</td> <td>0</td> </tr> </table> <h2>Wireless</h2> <table> <tr> <td class="tablesidebold">Wireless Channel</td> <td>11 (2462 MHz)</td> </tr> <tr> <td class="tablesidebold">Wireless Power Level</td> <td>10</td> </tr> <tr> <td class="tablesidebold">SSID Name</td> <td>keepout</td> </tr> <tr> <td class="indent">Status</td> <td>Inactive</td> </tr> <tr> <td class="indent">SSID Broadcast</td> <td>Enabled</td> </tr> <tr> <td class="indent">Security</td> <td>WEP-Open</td> </tr> </table> <h2>Devices</h2> <form name="pagepost1" method="post" action="xslt?PAGE=C_2_0_POST_SHOW" id="pagepost1"> <input type="hidden" name="NONCE" value="4fe5dff22290ce3" /> <input type="hidden" name="THISPAGE" value="C_2_0" /> <input type="hidden" name="SHOWSLEEPY" value="FALSE" /> <input type="submit" class="button" value="Hide Inactive Devices" /> </form> <table class="centerdata"> <tr> <th>Device</th> <th>Interface</th> <th>MAC Address</th> <th>IP Address</th> </tr> <tr> <td class="rowlabel">99.174.246.53</td> <td><img alt="" class="centerimg" src="/icons/icon_small_ethernet.gif" />Port 4</td> <td>00:1c:10:04:b4:aa</td> <td>99.174.246.53</td> <td> <a href="xslt?PAGE=C_2_0a&NODEID=0">Device Details</a> </td> <td> <a href="/xslt?PAGE=C_2_0b&THISPAGE=C_2_0&NEX TPAGE=C_2_0b&NODEID=0">Edit Name</a> </td> </tr> </table> <form name="pagepost3" method="post" action="xslt?PAGE=C_2_0_POST_CLEAR" id="pagepost3"> <input type="hidden" name="NONCE" value="4fe5dff22290ce3" /> <input type="hidden" name="THISPAGE" value="C_2_0" /> <p>Clearing the device list will not clear any devices which have host application mappings. Other per-device settings you may have made (IP addresses, Content Screening,etc) will be cleared. It is recommended you only do this when instructed to do so by customer care.</p> <input type="submit" class="button" value="Clear List" /> </form> <h2>Traffic Statistics</h2> <table class="centerdata"> <tr> <th>Interface</th> <th>Bytes</th> <th>Packets</th> <th>Errors</th> <th>%</th> </tr> <tr class="odd"> <td class="tablesidelabel" colspan="5">Ethernet</td> </tr> <tr> <td class="rowlabel">Port 1 Transmit</td> <td>0</td> <td>0</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 1 Receive</td> <td>0</td> <td>4294967296</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 2 Transmit</td> <td>0</td> <td>0</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 2 Receive</td> <td>0</td> <td>0</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 3 Transmit</td> <td>0</td> <td>0</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 3 Receive</td> <td>0</td> <td>0</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 4 Transmit</td> <td>11631390683</td> <td>4312895233</td> <td> -- </td> <td> -- </td> </tr> <tr> <td class="rowlabel">Port 4 Receive</td> <td>6053684714</td> <td>13595714</td> <td> -- </td> <td> -- </td> </tr> <tr class="odd"> <td class="tablesidelabel" colspan="5">USB</td> </tr> <tr> <td class="rowlabel"> Transmit</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td class="rowlabel"> Receive</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr class="odd"> <td class="tablesidelabel" colspan="5">Wireless</td> </tr> <tr> <td class="rowlabel"> Transmit</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr> <td class="rowlabel"> Receive</td> <td>0</td> <td>0</td> <td>0</td> <td>0</td> </tr> <tr class="odd"> <td class="tablesidelabel" colspan="5">HomePNA1</td> </tr> <tr> <td class="rowlabel"> Transmit</td> <td>4675564</td> <td>0</td> <td>14</td> <td>0</td> </tr> <tr> <td class="rowlabel"> Receive</td> <td>4540084</td> <td>0</td> <td>0</td> <td>0</td> </tr> </table> <form name="pagepost1" method="post" action="xslt?PAGE=C_2_0_POST_RESET" id="pagepost1"> <input type="hidden" name="NONCE" value="4fe5dff22290ce3" /> <input type="hidden" name="THISPAGE" value="C_2_0" /> <input type="submit" class="button" value="Reset Statistics" /> </form> </div> </div> </div> </div> </div> </body> </html>
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 04:28:26 PM
#4
<?xml version="1.0"?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title></title> <link rel="stylesheet" type="text/css" title="Main" href="/css/basic.css" /> <link rel="stylesheet" type="text/css" title="Main" href="/css/tabs.css" /> <script type="text/javascript" src="/javascript/prototype.lite.js"></script> <script type="text/javascript" src="/javascript/behaviour.js"></script> <script type="text/javascript" src="/javascript/style.js"></script> </head> <body> <div id="container"> <div id="logo"></div> <div id="header"> <ul id="primary"> <li> <a href="/xslt?PAGE=A_0_0">Home</a> </li> <li> <a href="/xslt?PAGE=B_0_0">Services</a> </li> <li> <span>Settings</span> </li> <li> <a href="/xslt?PAGE=D_0_0">Site Map</a> </li> </ul> </div> <div id="main"> <div id="outercontainer"> <div id="header2"> <ul id="secondary"> <li> <span>System Info</span> </li> <li> <a href="/xslt?PAGE=C_1_0">Broadband</a> </li> <li> <a href="/xslt?PAGE=C_2_0">LAN</a> </li> <li> <a href="/xslt?PAGE=C_3_0">Firewall</a> </li> <li> <a href="/xslt?PAGE=C_4_0">Logs</a> </li> <li> <a href="/xslt?PAGE=C_5_0">Diagnostics</a> </li> </ul> </div> <div id="innercontainer"> <div id="contents"> <div id="header3"> <ul id="tertiary"> <li> <span> <a href="/xslt?PAGE=C_0_0">Status</a> </span> </li> <li> <a href="/xslt?PAGE=C_0_1">Password</a> </li> <li> <a href="/xslt?PAGE=C_0_3">Event Notifications</a> </li> </ul> </div> <form name="pagepost" method="get" action="xslt" id="pagepost"> <input type="hidden" name="NONCE" value="4fe5dff22290ce3" /> <h2>System Information</h2> <table id="one" class="colortable"> <tr> <td class="tablesidelabel">Manufacturer</td> <td>2Wire, Inc.</td> </tr> <tr> <td class="tablesidelabel">Model</td> <td>3800HGV-B </td> </tr> <tr> <td class="tablesidelabel">Serial Number</td> <td>190919038480</td> </tr> <tr> <td class="tablesidelabel">Hardware Version</td> <td>2700-100531-006</td> </tr> <tr> <td class="tablesidelabel">Software Version</td> <td>6.1.9.24-enh.tm</td> </tr> <tr> <td class="tablesidelabel">Key Code</td> <td>52HP-2374-2262-22AT-F2BQ</td> </tr> <tr> <td class="tablesidelabel">First Use Date</td> <td>August 19, 2009</td> </tr> <tr> <td class="tablesidelabel">Current Date & Time</td> <td>Monday, March 22, 2010</td> </tr> <tr> <td></td> <td>4:27:52 PM</td> </tr> <tr> <td></td> <td></td> </tr> <tr> <td class="tablesidelabel">Time Since Last Boot</td> <td>6 days 13:26:20</td> </tr> <tr> <td class="tablesidelabel">DSL Modem</td> <td>2.49.12 SW:9_157_10_090625 </td> </tr> <tr> <td class="tablesidelabel">System Password</td> <td>Custom</td> </tr> </table> <h2>System Software Components</h2> <div class="stretcher"> <table class="colortable"> <tr> <td class="tablesidelabel">HPNA-upgrade</td> <td colspan="2">112875</td> </tr> <tr> <td class="tablesidelabel">VDSL-upgrade</td> <td colspan="2">112874</td> </tr> <tr> <td class="tablesidelabel">HPNA-upgrade</td> <td colspan="2">138429</td> </tr> <tr> <td class="tablesidelabel">VDSL-upgrade</td> <td colspan="2">138428</td> </tr> <tr> <td class="tablesidelabel">system</td> <td colspan="2">143771</td> </tr> <tr> <td class="tablesidelabel">att-lightspeed</td> <td colspan="2">143816</td> </tr> <tr> <td class="tablesidelabel">att-lightspeed_providerconf </td> <td colspan="2">137881</td> </tr> <tr> <td class="tablesidelabel">att-lightspeed_en</td> <td colspan="2">143815</td> </tr> <tr> <td class="tablesidelabel">common_ui</td> <td colspan="2">143772</td> </tr> <tr> <td class="tablesidelabel">att-unified-lightspeed_conf ig</td> <td colspan="2">143814</td> </tr> <tr> <td class="tablesidelabel">common_en</td> <td colspan="2">143773</td> </tr> <tr> <td class="tablesidelabel">base_voice</td> <td colspan="2">143774</td> </tr> <tr> <td class="tablesidelabel">att-lightspeed-fw-1_ippolic y</td> <td colspan="2">138523</td> </tr> <tr> <td class="tablesidelabel">Firewall Rules</td> <td>1000</td> </tr> <tr> <td class="tablesidelabel">Application List</td> <td>1001</td> </tr> </table> </div> </form> </div> </div> </div> </div> </div> </body> </html>
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 04:36:32 PM
#3 crashes the browser period. I cannot get it up here for you to look at.
here is the error.
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
Script: http://utalk.att.com/t5/scripts/13616B8DB61EEF369A
# 3 minus all the bars and numbers. only way i could get it.
<?xml version="1.0"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title></title>
<link rel="stylesheet" type="text/css" title="Main" href="/css/basic.css" />
<link rel="stylesheet" type="text/css" title="Main" href="/css/tabs.css" />
<script type="text/javascript" src="/javascript/prototype.lite.js"></script>
<script type="text/javascript" src="/javascript/behaviour.js"></script>
<script type="text/javascript" src="/javascript/style.js"></script>
<style type="text/css">
.lefttable {
float: left;
margin-left:0;
margin-right:auto;
}
#container {
width: 140.2em;
}
#scrolldiv {
height: 300px;
width: 130em;
overflow: auto;
}
</style>
</head>
<body>
<div id="container">
<div id="logo"></div>
<div id="header">
<ul id="primary">
<li>
<a href="/xslt?PAGE=A_0_0">Home</a>
</li>
<li>
<a href="/xslt?PAGE=B_0_0">Services</a>
</li>
<li>
<span>Settings</span>
</li>
<li>
<a href="/xslt?PAGE=D_0_0">Site Map</a>
</li>
</ul>
</div>
<div id="main">
<div id="outercontainer">
<div id="header2">
<ul id="secondary">
<li>
<a href="/xslt?PAGE=C_0_0">System Info</a>
</li>
<li>
<a href="/xslt?PAGE=C_1_0">Broadband</a>
</li>
<li>
<a href="/xslt?PAGE=C_2_0">LAN</a>
</li>
<li>
<a href="/xslt?PAGE=C_3_0">Firewall</a>
</li>
<li>
<a href="/xslt?PAGE=C_4_0">Logs</a>
</li>
<li>
<span>Diagnostics</span>
</li>
</ul>
</div>
<div id="innercontainer">
<div id="contents">
<div id="header3">
<ul id="tertiary">
<li>
<a href="/xslt?PAGE=C_5_0">Link Test</a>
</li>
<li>
<a href="/xslt?PAGE=C_5_2">Link Tree</a>
</li>
<li>
<span>
<a href="/xslt?PAGE=C_5_3">DSL</a>
</span>
</li>
<li>
<a href="/xslt?PAGE=C_5_4">IP Utilities</a>
</li>
<li>
<a href="/xslt?PAGE=C_5_5">NAT</a>
</li>
<li>
<a href="/xslt?PAGE=C_5_6">Syslog</a>
</li>
<li>
<a href="/xslt?PAGE=C_5_7">Resets</a>
</li>
</ul>
</div>
<h1>DSL Diagnostics - Training History</h1>
<h2>Physical Line 1</h2>
<h3>General Information</h3>
<div class="lefttable">
<table class="colortable">
<tr>
<td class="textbold">DSL Line (Wire Pair)</td>
<td>Coax</td>
</tr>
<tr>
<td class="textbold">Downstream Atten. at 300kHz</td>
<td>7.1 dB</td>
</tr>
<tr>
<td class="textbold">Final Rx Gain</td>
<td>3.0 dB</td>
<td>Ok</td>
</tr>
<tr>
<td class="textbold">Downstream Impulse Noise Protection:
</td>
<td>1.00</td>
</tr>
<tr>
<td class="textbold">Downstream Delay of Latency Path:
</td>
<td>7.90 ms</td>
</tr>
<tr>
<td class="textbold">Upstream Impulse Noise Protection:
</td>
<td>2.20</td>
</tr>
<tr>
<td class="textbold">Upstream Delay of Latency Path:
</td>
<td>7.70 ms</td>
</tr>
</table>
</div>
<div class="clearend"></div>
<h3>Training History</h3>
<div class="lefttable">
<table class="colortable">
<tr>
<td colspan="3"></td>
<td colspan="11" class="columnheader">Downstream</td>
<td></td>
<td colspan="17" class="columnheader">Upstream</td>
</tr>
<tr>
<td class="columnheaderborder">Time</td>
<td class="columnheaderborder">Line</td>
<td></td>
<td class="columnheaderborder">User Rate</td>
<td class="columnheaderborder">User Max1</td>
<td class="columnheaderborder">User Max2</td>
<td class="columnheaderborder">User Max3</td>
<td class="columnheaderborder">Mgn1</td>
<td class="columnheaderborder">Mgn2</td>
<td class="columnheaderborder">Attn</td>
<td class="columnheaderborder">Pwr</td>
<td class="columnheaderborder">CRCs</td>
<td class="columnheaderborder">FECs</td>
<td class="columnheaderborder">INP</td>
<td class="columnheaderborder">DLY</td>
<td></td>
<td class="columnheaderborder">User Rate</td>
<td class="columnheaderborder">Pwr</td>
<td class="columnheaderborder">CRCs</td>
<td class="columnheaderborder">FECs</td>
<td></td>
<td class="columnheaderborder">INP</td>
<td class="columnheaderborder">DLY</td>
<td class="columnheaderborder">Mode</td>
<td class="columnheaderborder">Vendor</td>
<td class="columnheaderborder">Exit Code</td>
<td nowrap="nowrap" class="columnheaderborder">Rx Gain</td>
</tr>
<tr>
<td nowrap="nowrap">2010/03/16 03:07:03 PDT</td>
<td nowrap="nowrap">3</td>
<td></td>
<td nowrap="nowrap">25208</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">0.0</td>
<td nowrap="nowrap">0.0</td>
<td nowrap="nowrap">12.9</td>
<td nowrap="nowrap">14.2</td>
<td nowrap="nowrap">0</td>
<td nowrap="nowrap">0</td>
<td nowrap="nowrap">1.00</td>
<td nowrap="nowrap">7.90</td>
<td></td>
<td nowrap="nowrap">2040</td>
<td nowrap="nowrap">-17.2</td>
<td nowrap="nowrap">0</td>
<td nowrap="nowrap">0</td>
<td></td>
<td nowrap="nowrap">2.20</td>
<td nowrap="nowrap">7.70</td>
<td nowrap="nowrap">G.993.2</td>
<td nowrap="nowrap">CXSY</td>
<td nowrap="nowrap">IDLE_REQUEST</td>
<td nowrap="nowrap">3.0</td>
</tr>
<tr>
<td nowrap="nowrap">2010/03/22 16:30:42 PDT</td>
<td nowrap="nowrap">3</td>
<td></td>
<td nowrap="nowrap">25208</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">64000</td>
<td nowrap="nowrap">29.5</td>
<td nowrap="nowrap">29.5</td>
<td nowrap="nowrap">12.9</td>
<td nowrap="nowrap">14.2</td>
<td nowrap="nowrap">1</td>
<td nowrap="nowrap">312532</td>
<td nowrap="nowrap">1.00</td>
<td nowrap="nowrap">7.90</td>
<td></td>
<td nowrap="nowrap">2040</td>
<td nowrap="nowrap">-17.5</td>
<td nowrap="nowrap">0</td>
<td nowrap="nowrap">0</td>
<td></td>
<td nowrap="nowrap">2.20</td>
<td nowrap="nowrap">7.70</td>
<td nowrap="nowrap">G.993.2</td>
<td nowrap="nowrap">CXSY</td>
<td nowrap="nowrap">N/A</td>
<td nowrap="nowrap">3.0</td>
</tr>
</table>
</div>
<div class="clearend"></div>
<h3>Bitloading</h3>
<table>
<tr>
<td class="textmonotiny">
<div id="scrolldiv">
<pre>minus all the bars and numbers that were in this location.</pre>
</div>
</td>
</tr>
</table>
<h3>Notes</h3>
<div class="lefttable">
<table class="colortable">
<tr>
<td class="textbold">Time</td>
<td>Time of last update</td>
</tr>
<tr>
<td class="textbold">User Max1</td>
<td>Max. user rate at start of connection</td>
</tr>
<tr>
<td class="textbold">User Max2</td>
<td>Current or final estimated max. user rate</td>
</tr>
<tr>
<td class="textbold">User Max3</td>
<td>Current or final estimated max. user rate without INC</td>
</tr>
<tr>
<td class="textbold">Mgn1</td>
<td>Noise margin at start of connection</td>
</tr>
<tr>
<td class="textbold">Mgn2</td>
<td>Current or final noise margin</td>
</tr>
<tr>
<td class="textbold">DLY</td>
<td>Downstream Delay of Latency Path</td>
</tr>
<tr>
<td colspan="30" class="mdcdotted"></td>
</tr>
</table>
</div>
<div class="clearend"></div>
</div>
</div>
</div>
</div>
</div>
</body>
</html>
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 05:35:45 PM
Thanks for the source code.
The bug should now be fixed, please re-download the package from the link in message #1, it is now v1.0.1.0.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 07:01:14 PM
Still getting the same error.
Perhaps it doesnt like 64 bit and it ooks like it was written for 32 bit.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
at System.Double.Parse(String s, NumberStyles style, NumberFormatInfo info)
at _2WireRealtime.Main.UpdateStats()
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.
----------------------------------------
2WireRealtime
Assembly Version: 1.0.1.0
Win32 Version: 1.0.1.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.Vis
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Window
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawin
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtim
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Config
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.
----------------------------------------
DataRetriever
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 07:12:59 PM
That's actually a different error at a different part of the program.
The program is fully 64-bit native. That's the beauty of .Net code -- it automatically compiles a combined native 64-bit and 32-bit application.
And I've run it on WinXP 32, Win7 32, and Win7 64 and it runs properly on all of them.
I will continue looking through your data, there is probably something different in your stats that is causing the problem.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 08:54:22 PM
OK, v1.0.2.0 is online. Please download from the link in message #1.
I tested it with your web page data this time, and it's working.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 10:07:38 PM
Still failing even restarted.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentOutOfRangeException: Value of '-192711' is not valid for 'Value'. 'Value' should be between 'minimum' and 'maximum'.
Parameter name: Value
at System.Windows.Forms.ProgressBar.set_Value(Int32 value)
at _2WireRealtime.Main.UpdateStats()
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.
----------------------------------------
2WireRealtime
Assembly Version: 1.0.2.0
Win32 Version: 1.0.2.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.Vis
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Window
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawin
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtim
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Config
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.
----------------------------------------
DataRetriever
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Users/Brian/Downloads/2WireRealtime/2Wi
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-22-2010 10:37:24 PM
very cool program, it works thus far.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 01:14:30 AM
Nifty program.
Can I ask for a minor feature? Could one pass a command to it with the IP address of the RG. As auto does not work when my Linksys WRT54GL is between the PC and the RG. Otherwise works fine. Thanks.
Glynne
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 07:22:46 AM
bsm2003,
OK, I will continue to examine the code. Your stats must be producing some unexpected conditions, but I'll track down the issue.
Glynne,
Instead of passing a command to the program, what if it remembered the IP address between launch instances? So you could start it up the first time, configure it with a custom IP, and then shut it down, and the next time you start it up it will initially try to use the previously-used IP?

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 10:31:28 AM
Sounds good to me. <smile>
Glynne
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 05:20:50 PM
v1.0.3.0 now posted.
This version will save the state of the Automatic checkbox and the router IP address between program launchings.
I have also added additional data value checks to ensure that the program will not try to report invalid readings.
If anyone finds additional bugs, please report them here. I still have not tested under the following conditions:
- FTTP connection vice FTTN
- Coax and Wireless data rates have not yet been tested, since I have both of those interfaces turned off in my installation.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 08:19:56 PM
Tis working now. Thanks.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-23-2010 08:36:58 PM
Excellent. Please check your interface rate reports and ensure they're performing as expected. Let me know if anything does not look right.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-25-2010 04:08:04 PM
SomeJoe
I downloaded and am running your program. It's pretty cool, Thanks bunch. The readme file helps too. Good to know what things really mean, not what you think they are telling you.
Strange thing though. I was set on the 32/5 profile and have 3HD streams. Now my profile is saying I still have the 32200 downstream, but my upstream changed to 3424. Ever see this before? It doesn't seem to have affected my service in any way......
I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinion.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-25-2010 04:15:52 PM
Yes, there's a few people who have reported that their actual upstream rate on the 32/5 profile is something other than 5040. It doesn't seem to cause any problem.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-25-2010 04:24:02 PM
Thanks. Weird though, because it was 5040 until I got the new RG update last night. No issues yet with the upgrade, though...
I am an AT&T employee and the postings on this site are my own and don't necessarily represent AT&T's position, strategies or opinion.
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-26-2010 10:53:00 AM
FYI, I just found another condition when the software 'crashes'. When the DSL connection is lost/retrains. Shuld be easy to duplicate. <sigh>
Thanks.
Glynne
Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-26-2010 11:05:56 AM
Glynne wrote:
FYI, I just found another condition when the software 'crashes'. When the DSL connection is lost/retrains. Shuld be easy to duplicate. <sigh>
OK, will take a look at that this weekend.

Re: 2WireRealt ime.exe
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Email to a Friend
- Report Inappropriate Content
03-27-2010 04:16:27 PM
Hi SomeJoe,
I am an FTTP customer, so maybe I can help you out with the info you need. Here is the exception I get when I try to run your tool.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.FormatException: Input string was not in a correct format.
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
at System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)
at System.Double.Parse(String s, NumberStyles style, NumberFormatInfo info)
at DataRetriever._3800HGV.get_VDSLSync()
at _2WireRealtime.Main.UpdateStats()
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndPr
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)








