RFi Troubles and maybe line issues.

[dopamine5ht]

I mean a family member does do welding, and I can handle that killing the line although I am looking for possible solutions to said problem and suggestions.

On several occassions with the garage turned off. Our pots line and the dsl died totally on 3 seperate instances. One with a person saying hello helo, without no caller id how very mysterious. I chalked it up to maybe some work on the box down the road. Even when our line died again, I walked over to the vrad about 4 block walk, looked fine.

The question is how hard is it going to be to look into these issues, with interfence the my family is generating and outside interference. Or are the two related, and it could be some kind of bridge tap or some stupid thing. 

this aint exactly a trivial  thing to figure out. I have tried chokes, no chokes. Now I just a snap on beed no wrapping.

talking to basic tech support will be like going threw a maze. Any suggestions from the community that has some

experience, before I decide to call them if I call them.

What is really weird is I am getting higher sync rates recently. I would never sync above max rate 27000.

2012/02/25 20:51:40 CST 1 25208 29511 29511 29511 10.0 1.5 22.0 13.1 714 61793 1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY ERR_HI_BER_LIMIT 9.0

2012/02/25 20:53:14 CST 1 25208 29631 29631 29631 11.0 11.0 23.9 13.0 874 55989 1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY ERR_HI_BER_LIMIT 9.0

2012/02/25 20:54:32 CST 1 25208 29668 29668 29668 11.0 11.0 23.8 13.2 0 51 1.00 7.90 2040 0 0.0 0.0 0.0 7.1 0 0 2.20 7.70 G.993.2 CXSY N/A 9.0 2012/02/25 20:56:43 CST 1 25208 13206 13206 13206 0.0 0.0 23.8 12.3 859
54663 1.00 7.90 2040 0 0.0 0.0 0.0 7.3 0 0 2.20 7.70 G.993.2 CXSY TERMINATE 9.0

2012/02/25 21:00:16 CST 1 25208 29429 29429 29429 11.0 11.0 23.9 13.1 0 0 1.00 7.90 2040 0 0.0 0.0 0.0 7.1 0 0 2.20 7.70 G.993.2 CXSY N/A 9.0 2012/02/25 21:11:26 CST 1 25208 28197 28197 28197 10.5 11.0 21.7 13.1 917 58270 1.00 7.90 2040 0 0.0 0.0 0.0 7.1 0 0 2.20 7.70 G.993.2 CXSY ERR_HI_BER_LIMIT 9.0
2012/02/25 21:16:34 CST 1 25208 29533 29533 29533 0.0 0.0 23.9 13.0 0 0
1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY TERMINATE
9.0
2012/02/25 21:20:37 CST 1 25208 29507 29507 29507 11.0 11.0 23.9 13.1
800 50780 1.00 7.90 2040 0 0.0 0.0 0.0 7.1 0 0 2.20 7.70 G.993.2 CXSY
TERMINATE 9.0
2012/02/25 22:04:31 CST 1 25208 29459 29459 29459 11.5 11.5 23.9 13.0
10 800 1.00 7.90 2040 0 0.0 0.0 0.0 7.1 0 0 2.20 7.70 G.993.2 CXSY N/A 9.0
2012/02/25 22:06:11 CST 1 25208 29605 29605 29605 0.0 0.0 23.7 13.6 0 0 1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY TERMINATE 9.0
2012/02/25 22:07:46 CST 1 25208 29571 29571 29571 -1.0 -1.0 23.9 13.1 0 0 1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY TERMINATE 9.0
2012/02/26 08:55:41 CST 1 25208 29459 29459 29459 11.0 -7.5 23.7 13.1 830 55436 1.00 7.90 2040 0 0.0 0.0 0.0 7.2 0 0 2.20 7.70 G.993.2 CXSY ERR_LOS_LIMIT 9.0
2012/02/26 19:25:50 CST 1 25208 28272 28272 28272 10.0 10.5 24.5 12.9 11 30887 1.00 7.90 2040 0 0.0 0.0 0.0 6.9 0 0 2.20 7.70 G.993.2 CXSY N/A 9.0

[dopamine5ht]

Random dissconnects where because some mis jumpered wire at the cross box happy day.

Still wondering if I have to put up with my ugly bitloading graph, bit loading didn't change at all.