U-Verse Realtime v1.2.0.0

[SomeJoe7777 ACE - Expert]

U-Verse Realtime v1.2.0.0 is released.

The program (.exe installer) may be downloaded here.

U-Verse Realtime is a standalone program that can retrieve information from a typical residential installation of the AT&T U-Verse IPTV system. Some of the information displayed consists of VDSL line analysis, network interface data rates, DVR information, and STB channel and stream information. This program requires that your U-Verse Residential Gateway (the 2Wire 3800HGV) be running firmware version 6.1.9.24 only. Previous versions will not work with this program.

U-Verse Realtime v1.2.0.0 is the evolution of the previous program, 2WireRealtime. The new features added to UVerse Realtime expand its functionality beyond simply looking at statistics from the 2Wire 3800HGV router, so the program was renamed to better reflect its scope. 2WireRealtime will not auto-update to U-Verse Realtime, you must download the new installer.

Fixes and New Features

• Program renamed to U-Verse Realtime to better reflect the scope of functionality.
• Fix last digit of coax station MAC addresses
• Add date/time to panel so it appears in screenshots
• Add comma & significant figures to FEC/CRC rates
• Fix Bits in use highlighting - yellow vice red @ 100%
• Add Hardware version to IP and Gateway information
• Change to ListView control for coax/HPNA reporting for better line-up of information
• Add STB channels tab with current channels being watched, stream totals, and DVR space analysis.
• Change ReadMe to PDF vice .txt file to be able to hold graphics.
• Change to MSI installer to allow user to install WinPcap.

System Requirements Change

System requirements have been modified significantly from 2WireRealtime -- please read the documentation in the ReadMe file!

Basic System Requirements

• U-Verse Realtime requires a Windows XP, Vista, 7, Server 2003, Server 2008, or Server 2008R2 system to run. U-Verse Realtime is an x86 (32-bit) application, but will run on x64 machines with no issues.
• U-Verse Realtime requires that the Microsoft .Net Framework v3.5 is installed on your system. If it is not, the installer will prompt you to install it. If you want to manually install it, go to Windows Update and look under the Optional updates.

Additional System Requirements for STB Channels/Streams Feature

• Use of the STB Channels/Streams feature requires a wired Ethernet network interface – U-Verse Realtime will not be able to gather this information on a computer with only a wireless interface.
• Use of the STB Channels/Streams feature will probably require that any software firewalls be disabled completely. Note that it is not enough to “allow” or “whitelist” the U-Verse Realtime executable file because the packet capture techniques will still not work under that condition. In fact, some software firewalls may have to be removed from the computer completely rather than just disabled because they interfere with WinPcap.
• It is highly recommended that the computer running U-Verse Realtime is directly connected to the RG, with no intervening network switch. If the computer is instead connected to a network switch, U-Verse Realtime will cause a large amount of extra network traffic that may interfere with other devices when the STB Channels/Streams feature is used.
• The STB Channels/Streams feature is turned off by default. If you meet the above system requirements, you can turn it on by checking the “Enable Gathering STB Channel/Stream Data” setting on the Configuration tab.

As always, please post here with any comments or bugs.

[texasguy37 ACE - Expert]

SomeJoe, nice app. Thank you!

[RCSMG ACE - Expert]

Very nice app Joe.   Thanks.

[SomeJoe7777 ACE - Expert]

Thanks, Gents!

Here's a screenshot of the new STB Channels/Streams tab to get an idea of the new functionality:

It shows the STBs on your network, with the current channel that each one is tuned to.  It also shows whether each channel is HD or SD.

It also shows your total stream usage, both for total streams and for HD streams.

Finally, it shows a complete DVR space analysis, with remaining record times, as well as a recording indicator.

I've also broken out the ReadMe out of the installation package, so you can view the ReadMe without downloading and installing the full package.  View the ReadMe here.

[RCSMG ACE - Expert]

I am not seeing any info in the Channel Streams tab.  I activated it but nothing is showing up yet.  I have seen the info in the other tabs though.  It might be because I am running the app on a computer that is hardwired to the dvr stb instead of the rg.  i will run it on my desktop computer 2morrow and let you know.

[SomeJoe7777 ACE - Expert]

Ya, I don't think it's going to work right plugged into the back of an STB.  Plug in directly to the RG.

[RCSMG ACE - Expert]

I will let you know tomorrow.  I am too lazy to go back and turn on that computer right now. 

The issues I was having with losing all of my services appears to be related to the 32/5 profile.  Since I was downgraded to the 25/2 my service is stable.  I saw on your app that the recommended profile is 32/5.  This app is going to be fun to work with.

[SomeJoe7777 ACE - Expert]

If the line parameters cause the app to recommend 32/5, but 32/5 didn't work, it indicates some possible line problems that may not show up in the numerical stats, but might be on the bitloading graph.  Post a screenshot of that.

[oufanindallas]

I have FTTP and I'm using the app on a computer that is plugged directly into the RG but I'm not seeing any channel information,  I know for a fact that the DVR is on the local CBS HD station since I'm watching it right now.  I have enabled the gathering feature.  Not sure what else to do.  It is telling me how much time/space I have left on my DVR which is a nice quick way to access that.

[SomeJoe7777 ACE - Expert]

---

oufanindallas wrote:

I have FTTP and I'm using the app on a computer that is plugged directly into the RG but I'm not seeing any channel information,  I know for a fact that the DVR is on the local CBS HD station since I'm watching it right now.  I have enabled the gathering feature.  Not sure what else to do.  It is telling me how much time/space I have left on my DVR which is a nice quick way to access that.

---

Did you remove any software firewalls on the computer?  They will prevent UVRT from seeing the channel information.

[dcc-verse]

Is this real?

[SomeJoe7777 ACE - Expert]

No, that is a false positive.  There is no trojan in the download package.

[wheelspinner20]

This is what I get when I tried to install realtime....

An error occurred downloading the following resource:
http://go.microsoft.com/fwlink/?LinkId=97964

Date: 6/24/2010 11:25:48 PM

See the setup log file located at 'C:\DOCUME~1\Dad\LOCALS~1\Temp\VSD4C.tmp\install.log' for more information.

Any ideas??

Also, since a very bad storm hit me last night, the one pc that is NOT wireless will not connect to the internet.  Is it possible that my ethernet card took a hit??

Thanks.

P.

[SomeJoe7777 ACE - Expert]

The setup file in the package will attempt to install the .Net Framework 3.5 package if it's not already on your PC, because it's required for UVRT to run.  The error message indicates that your computer was unable to downlaod the .Net package from Microsoft.

You may want to try going to Windows Update and installing it separately from there (it's under the optional updates).  After it's installed, then try to reinstall the UVRT package.

[djmegahertz_1]

Hey Joe,

Just an FYI as I know this is a flase positive, but Malwarebytes.org just started to report 2 days ago the following..

UVRT-v1.5.0.0-Installer.exe (Trojan.Swisyn)

[SomeJoe7777 ACE - Expert]

---

djmegahertz_1 wrote:

Hey Joe,

Just an FYI as I know this is a flase positive, but Malwarebytes.org just started to report 2 days ago the following..

UVRT-v1.5.0.0-Installer.exe (Trojan.Swisyn)

---

Virscan.org report (36 different anti-virus engines) for UVRT v1.5.0.0 Installer, shows no positive infection.

Virscan.org report (36 different anti-virus engines) for UVRT v1.6.0.0 Installer, shows a single positive, this is a false positive.