01-05-2012 07:02:55 PM
01-06-2012 03:55:48 AM
Did you try the App on your TV:
Menu > Help > System Setup > Program Your UV Remote
01-06-2012 05:19:59 AM
When the TV is programmed the default is to have the STB and TV turned on with one power button press and the volume button controls the TV - always. There are codes to change this operation.
977 changes the power up - press att/ok together then 977 then each device you want to turn on/off starting with att. If you do 2 & later want to add another you start over & enter all three. After the last mode button press enter to save your setting.
For the volume press att/ok together then 955.
If you press enter the volume will follow whichever mode key is active.
If you want a device to always control the volume press that mode button before pressing enter.
01-15-2012 06:14:51 PM
Thanks for posting your solution to help others.
The code that worked for me was 5167 for the Yamaha RX-V671.
08-15-2012 07:32:02 AM
Thanks for your posting. I just bought the same Yamaha Reciever RX-V671 and it rocks!
I love the multiple zones and being able to use my phone app to control it.
But...Everytime I power up my system, it turns on Zone 2 which turns on the outside speakers. Does your reciver turn on all zones when you start up? Am I missing a setting on my reciever?
08-15-2012 08:29:15 AM
Seems like you should be able to set a default. Does it turn on to where it was when turned off?
How about swapping outside wiring & whatever you prefer. When you turn it on it will be zone 2, but it will be speakers you want.