To test the theory I ran an extension cord from several different outlets in my home to power the tread mill. it took several tries but I finally found that by plugging in to an outlet in the master bedroom I was able to run the tread mill without experiencing any interruption to the U-Verse system. I built my own Structured wiring cabinet in a bedroom closet and ran power to that cabinet from the closest most convenient outlet and had ATT place the RG in that cabinet with all my Cat5e home runs. The system works great and I can redistribute internet and video to any room in my house by simply unplugging one wire and plugging in another... Fine with the exception of the tread mill issue. I'll just buy a box of romex and power the outlet in the cabinet from a master bedroom outlet about 40' away and the problem should be resolved.

I got plenty of good information off this board prior to installation and you guy's proved very helpful post installation as well.

Thanks again for the quick replies.

Frito